Dell N1100-ON

Switch Management Commands 2285
Default Configuration
This command has no default configuration.
Command Mode
Crypto Certificate Generation or Crypto Certificate Request mode
User Guidelines
This command mode is entered using the crypto certificate request or crypto
certificate generate command.
Example
The following example displays how to specify the Dell EMC Networking
organization-unit.
console(config-crypto-cert)#organization-unit “Dell EMC Networking“
show crypto certificate mycertificate
Use the show crypto certificate mycertificate command to view the SSL
certificates of your switch.
Syntax
show crypto certificate mycertificate [number]
• number — Specifies the certificate number. (Range: 1–2 digits)
Default configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
Example
The following example displays the SSL certificate of a sample switch.
console(config)#show crypto certificate mycertificate 1