Dell N1100-ON

Switch Management Commands 1859
clock summer-time date
Use the clock summer-time date {{date|month}|{month|date}} year
hh:mm {{date|month}|{month|date}} year hh:mm [offset offset] [zone
acronym] command to set the summertime offset to UTC. If the optional
parameters are not specified, they are read as either '0' or '\0', as appropriate.
Syntax
clock summer-time date {date | month} {month | date} year hh:mm {date
| month} {month | date} year hh:mm [offset offset] [zone acronym]
• date — Day of the month. (Range: 1–31)
• month — Month. (Range: The first three letters by name; jan, for
example.)
• year — Year. (Range: 2000–2097)
• hh:mm — Time in 24-hour format in hours and minutes. (Range: hh: 0–
23, mm: 0–59)
• offset — Number of minutes to add during the summertime. (Range: 1–
1440)
• acronym — The acronym for the time zone to be displayed when
summertime is in effect. (Range: Up to four upper or lower case
alphabetic characters)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration
User Guidelines
No specific guidelines
Examples
console(config)# clock summer-time date 1 Apr 2014 02:00 28 Oct 2014 02:00
offset 60 zone EST
or