Dell N1100-ON

Layer 2 Switching Commands 369
Default Configuration
There is no default configuration for this command.
Command Modes
User Exec, Privileged Exec (all show modes)
User Guidelines
The filter type is one of the following values:
• ipv6-mac: User has configure MAC address filtering on this interface
• ipv6: IPv6 address filtering is configured on this interface
• N/A: No filtering is configured on the interface
Example
console(config-if-Gi1/0/5)#show ipv6 verify
Interface Filter Type
----------- -----------
Gi1/0/1 ipv6
Gi1/0/2 ipv6-mac
Gi1/0/3 N/A
Gi1/0/4 N/A
Gi1/0/5 ipv6-mac
Gi1/0/6 N/A
Gi1/0/7 N/A
Gi1/0/8 N/A
Gi1/0/9 N/A
console(config-if-Gi1/0/5)#show ipv6 verify interface gi1/0/5
Interface Filter Type
----------- -----------
Gi1/0/5 ipv6-mac
show ipv6 verify source
Use the show ipv6 verify source command to display the IPv6 Source Guard
configurations on all ports.