Dell N1100-ON

Dell EMC Networking CLI 173
IGMP Proxy
IP Helper/DHCP Relay
show ip igmp interface stats Displays the IGMP statistical information for
the interface.
PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types .
arp Enables the IGMP Proxy on the router. IC
ip igmp proxy-service reset-
status
Resets the host interface status parameters of
the IGMP Proxy router.
IC
ip igmp proxy-service
unsolicit-rprt-interval
Sets the unsolicited report interval for the
IGMP Proxy router.
IC
show ip igmp proxy-service Displays a summary of the host interface status
parameters.
PE
show ip igmp proxy-service
interface
Displays a detailed list of the host interface
status parameters.
PE
show ip igmp-proxy groups Displays a table of information about multicast
groups that IGMP Proxy reported.
PE
show ip igmp proxy-service
groups detail
Displays complete information about multicast
groups that IGMP Proxy has reported.
PE
Command Description Mode
a
bootpdhcprelay
maxhopcount
Configures the maximum allowable relay agent
hops for BootP/DHCP Relay on the system.
GC
bootpdhcprelay
minwaittime
Configures the minimum wait time in seconds
for BootP/DHCP Relay on the system.
GC
clear ip helper statistics Resets (to 0) the statistics displayed in show ip
helper statistics.
PE
Command Description Mode
a