Switch Management Commands 2097
User Guidelines
This command has no user guidelines.
Example
The following examples display the configuration of views with and without a
view name specified.
show trapflags
Use the show trapflags command to display the trap settings.
Syntax
show trapflags [vrf {vrf-name}][ospf|ospfv3|captive-portal]
• vrf-name—The name of an existing VRF instance.
• ospf—Display OSPFv2 specific trap settings.
• ospfv3—Display OSPFv3 specific trap settings.
• captive-portal—Display captive-portal specific trap settings.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
console# show snmp views
Name OID Tree Type
----------- ----------------------- ---------
user-view1 1.3.6.1.2.1.1 Included
user-view1 1.3.6.1.2.1.1.7 Excluded
user-view2 1.3.6.1.2.1.2.2.1.*.1 Included
To Next Page
Loading...
