Dell N1100-ON - Show Captive-Portal User

Security Commands 1010
Command Mode
Privileged Exec mode.
User Guidelines
There are no user guidelines for this command.
Example
console#clear captive-portal users
no user
Use the no user command to delete a user from the local user database. If the
user has an existing session, it is disconnected.
Syntax
no user user-id
• user-id — User ID (Range: 1–128).
Default Configuration
There is no default configuration for this command.
Command Mode
Captive Portal Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-cp)#no user 1
show captive-portal user
Use the show captive-portal user command to display all configured users or a
specific user in the captive portal local user database.