Switch Management Commands 2093
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
Per RFC 2573, an implicit exclude all filter is present at the beginning of
every filter list. This implicit filter is not shown in the output of this
command.
Example
The following examples display the configuration of filters with and without a
filter name specification.
console # show snmp filters
Name OID Tree Type
------------------- ---------------------------------
user-filter1 1.3.6.1.2.1.1 Included
user-filter1 1.3.6.1.2.1.1.7 Excluded
user-filter2 1.3.6.1.2.1.2.2.1.*.1 Included
console # show snmp filters user-filter1
Name OID Tree Type
------------------- ---------------------------------
user-filter1 1.3.6.1.2.1.1 Included
user-filter1 1.3.6.1.2.1.1.7 Excluded
show snmp group
Use the show snmp group command to display the configuration of groups.
Syntax
show snmp group [groupname]
• groupname — Specifies the name of the group. (Range: 1-30)
To Next Page
Loading...
Need help?
General
