Dell N1100-ON

Dell EMC Networking CLI 107
DHCP Snooping
show dhcp l2relay stats
interface
Displays DHCP L2 Relay statistics specific to
interfaces.
PE or
GC
show dhcp l2relay agent-
option vlan
Displays DHCP L2 Relay Option-82
configuration specific to VLANs.
PE or
GC
show dhcp l2relay vlan Displays whether DHCP L2 Relay is globally
enabled on the specified VLAN or VLAN range.
PE or
GC
show dhcp l2relay circuit-id
vlan
Displays whether DHCP L2 Relay is globally
enabled and whether the DHCP Circuit-ID
option is enabled on the specified VLAN or
VLAN range.
PE or
GC
show dhcp l2relay remote-id
vlan
Displays whether DHCP L2 Relay is globally
enabled and shows the remote ID configured on
the specified VLAN or VLAN range.
PE or
GC
clear dhcp l2relay statistics
interface
Resets the DHCP L2 Relay counters to zero. PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
clear ip dhcp snooping
binding
Clears all DHCP Snooping entries. PE
clear ip dhcp snooping
statistics
Clears all DHCP Snooping statistics. PE
ip dhcp snooping Enables DHCP snooping globally or on a
specific VLAN.
GC or
IC
ip dhcp snooping binding Configures a static DHCP Snooping binding. GC
ip dhcp snooping database Configures the persistent location of the DHCP
snooping database.
GC
ip dhcp snooping database
write-delay
Configures the interval in seconds at which the
DHCP Snooping database will be stored in
persistent storage.
GC
ip dhcp snooping limit Controls the maximum rate of DHCP
messages.
IC
Command Description Mode
a