Layer 3 Routing Commands 1695
Number of Link Events................ 1
Local Link LSAs...................... 0
Local Link LSA Checksum.............. 0
show ip ospf interface brief
Use the show ip ospf interface brief command to display brief information
for the IFO object or virtual interface tables.
Syntax
show ip ospf interface brief [vrf vrf-name]
• vrf-name—The name of the VRF instance on which the command
operates. If no VRF parameter is given, information for the default
(global) router instance is shown.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The VRF identified in the parameter must have been previously created or an
error is returned.
The VRF parameter is only available on the N3000/N3100/N4000 series
switches.
Example
The following example displays brief information for the IFO object or virtual
interface tables.
console#show ip ospf interface brief
To Next Page
Loading...
Need help?
General
