Dell N1100-ON

Security Commands 947
• ip-address — The name or IP address of the host.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Examples
The following example displays TACACS+ server settings.
console#show tacacs
Global Timeout: 5
Server Address Port Timeout Priority Source Interface
--------------- ----- ------- -------- -----------------
10.254.24.162 49 Global 0 Loopback 0
tacacs-server host
Use the tacacs-server host command in Global Configuration mode to
configure a TACACS+ server. This command enters into the TACACS+
configuration mode. To delete the specified hostname or IP address, use the
no form of this command.
Syntax
tacacs-server host {ip-address | hostname}
no tacacs-server host {ip-address | hostname}
• ip-address — The IP address of the TACACS+ server.
• hostname — The hostname of the TACACS+ server. (Range: 1-255
characters).