Dell N1100-ON

Dell EMC Networking CLI 104
Address Table
remark Adds a comment to an ACL rule. IPAF4,
IPAF,
ML,
ARPA
service-acl input Blocks Link Local Protocol Filtering (LLPF)
protocol(s) on a given port.
IC
show access-lists interface Displays interface ACLs. PE
show service-acl interface Displays the status of LLPF rules configured on
a particular port or on all the ports.
PE
show ip access-lists Displays an Access Control List (ACL) and all
of the rules that are defined for the ACL.
PE
show mac access-lists Displays a MAC access list and all of the rules
that are defined for the ACL.
PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
clear mac address-table Removes any learned entries from the
forwarding database.
PE
mac address-table aging-
time
Sets the address table aging time. GC
mac address-table multicast
forbidden address
Forbids adding a specific multicast address to
specific ports.
GC
mac address-table static vlan Registers MAC-layer multicast addresses to the
bridge forwarding table, and adds static ports to
the group.
GC
switchport port-security
(Interface Configuration)
Disables new address learning on an interface. IC
show mac address-table Displays dynamically created entries in the
bridge-forwarding database.
PE
show mac address-table
address
Displays all entries in the bridge-forwarding
database for the specified MAC address.
UE or
PE
Command Description Mode
a