Dell N1100-ON

Switch Management Commands 2263
User Interface Commands
This section explains the following commands:
configure terminal
Use the configure terminal command to enter Global Configuration mode.
This command is equivalent to the configure command with no terminal
argument.
Syntax
configure [terminal]
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode
Example
console#conf t
console(config)#
console#configure terminal
console(config)#
do
Use the do command to execute commands available in Privileged Exec
mode from Global Configuration or any Configuration submode with
command line completion.
configure terminal end
do exit
enable quit