Switch Management Commands 2020
console> show rmon history 1 other
Sample Set: 1 Owner: Me
Interface: Gi1/0/1 Interval: 1800
Requested samples: 50 Granted samples: 50
Maximum table size: 270
Time Dropped Collisions
------------------- ----------- -----------
10-Mar-2005 22:06:00 3 0
10-Mar-2005 22:06:20 3 0
show rmon log
Use the show rmon log command in User Exec mode to display the RMON
logging table.
Syntax
show rmon log [event]
• event — Event index. (Range: 1–65535)
Default Configuration
This command has no default configuration.
Command Mode
User Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The following table describes the significant fields shown in the display:
Example
The following examples display the RMON logging table.
Field Description
Event An index that uniquely identifies the event.
Description A comment describing this event.
Time The time this entry was created.
To Next Page
Loading...
