Dell N1100-ON

Layer 2 Switching Commands 551
Default Configuration
By default, data is removed only on system reset.
Command Mode
Privileged Exec mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to clear the LLDP remote data.
console#clear lldp remote-data
clear lldp statistics
Use the clear lldp statistics command to reset all LLDP statistics.
Syntax
clear lldp statistics
Default Configuration
By default, the statistics are only cleared on a system reset.
Command Mode
Privileged Exec mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to reset all LLDP statistics.
console#clear lldp statistics