Switch Management Commands 1938
HiveAgent Commands
The commands in this section enable configuration of the Dell HiveAgent.
Commands in this Section
This section explains the following commands:
eula-consent
Use the eula-consent command to accept or decline the end-user license
agreement (EULA) for the hive agent. If accepted, the latest version of the
HiveAgent starts. If declined, all Hive Agent applications are stopped.
Syntax
eula-consent {hiveagent} {accept | reject}
• hiveagent—Enter the keyword hiveagent to either accept or reject the
EULA for the HiveAgent.
• accept — Accepts the EULA for the specified service.
• reject — Rejects the EULA for the specified service.
Default Configuration
The default is eula-consent hiveagent accept.
Command Mode
Global Configuration
eula-consent proxy-ip-address
hiveagent url
server show hiveagent status
enable show eula-consent hiveagent
To Next Page
Loading...
