Switch Management Commands 2075
Default Configuration
There is no default configuration.
Command Mode
Support mode
User Guidelines
This command has no user guidelines.
Command History
Introduced in version 6.2.0.1 firmware.
write core
Use the write core command to generate a core file on demand and either
reboot the switch or test the core file configuration.
Syntax
write core [test [dest-file-name]]
• dest-file-name — The file name used if a tftp-server is configured with
the exception dump tftp-server command. The dest-file-name
parameter overrides the file name parameters configured with the
exception core-file command.
Default Configuration
This command has no default configuration.
Command Modes
Privileged Exec mode
User Guidelines
Using the write core command reboots the switch. The write core command
is useful when the device malfunctions, but has not crashed.
To Next Page
Loading...
