Layer 3 Routing Commands 1240
Command Mode
BGP Router Configuration mode
User Guidelines
There are no user guidelines.
Command History
Introduced in version 6.2.0.1 firmware.
Example
console(config-router)#default-metric 1
default metric (IPv6 Address Family
Configuration)
This command sets the metric of redistributed IPv6 routes when a metric is
not configured in the redistribute command.
Syntax
default-metric value
no default-metric
• value—The value to as the MED. The range is 1 to 4,294,967,295.
Default Configuration
By default, no default metric is set and no MED is included in redistributed
routes.
Command Mode
IPv6 Address Family Configuration mode
User Guidelines
There are no user guidelines.
To Next Page
Loading...
