Layer 3 Routing Commands 1419
Default Configuration
This command has no default condition.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the neighbor information for DVMRP.
console(config)#show ip dvmrp neighbor
No neighbors available.
show ip dvmrp nexthop
Use the show ip dvmrp nexthop command to display the next hop
information on outgoing interfaces for routing multicast datagrams.
Syntax
show ip dvmrp nexthop
Default Configuration
This command has no default condition.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
To Next Page
Loading...
