Switch Management Commands 2017
Rising Threshold Status: Positive
Falling Threshold High: 20
Falling Threshold Low: 10
Falling Threshold Status: Positive
Rising Event: 1
Falling Event: 2
Startup Alarm: Rising
Owner: dell-owner
console#show rmon hcalarms
Index OID Owner
----------------------------------------------
2 ifInOctets.1 dell-owner
show rmon history
Use the show rmon history command in User Exec mode to display RMON
Ethernet Statistics history. Also see the
rmon collection history
command.
Syntax
show rmon history index [throughput | errors | other] [period seconds]
• index — The requested set of samples. (Range: 1–65535)
• throughput — Displays throughput counters.
• errors — Displays error counters.
• other — Displays drop and collision counters.
• period seconds — Specifies the requested period time to display.
(Range: 0–2147483647)
Default Configuration
This command has no default configuration.
Command Mode
User Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The following table describes the significant fields shown in the display:
To Next Page
Loading...
