Dell N1100-ON

Layer 2 Switching Commands 460
no gvrp enable
Default Configuration
GVRP is globally disabled.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example globally enables GVRP on the device.
console(config)#gvrp enable
gvrp enable (Interface Configuration)
Use the gvrp enable command in Interface Configuration mode to enable
GVRP on an interface. To disable GVRP on an interface, use the no form of
this command.
Syntax
gvrp enable
no gvrp enable
Default Configuration
GVRP is disabled on all interfaces by default.
Command Mode
Interface Configuration (gigabitethernet, port-channel, tengigabitethernet,
fortygigabitethernet) mode