Dell N1100-ON

Security Commands 979
show dot1x clients
Use the show dot1x clients command to display 802.1x client information.
The client information is displayed in summary or in detail. The command
also displays the statistics of the number of clients that are authenticated
using Monitor Mode and using 802.1x.
Syntax
show dot1x clients {interface–id | all}
• interface–id—Any valid interface. See Interface Naming Conventions for
interface representation.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The following fields are displayed by this command.
The following table describes the significant fields shown in the display.
Field Description
Clients
Authenticated using
Monitor Mode
Indicates the number of Dot1x clients authenticated using
Monitor mode.
Clients
Authenticated using
Dot1x
Indicates the number of Dot1x clients authenticated using
802.1x authentication process.
Field Description
Interface The port number.