Dell N1100-ON

Security Commands 996
Example
console#show captive-portal
Administrative Mode....................... Disabled
Operational Status........................ Disabled
Disable Reason............................ Administrator Disabled
CP IP Address............................. 1.2.3.4
show captive-portal status
Use the show captive-portal status command to report the status of all
captive portal instances in the system.
Syntax
show captive-portal status
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal status
Additional HTTP Port........................... 81
Additional HTTP Secure Port.................... 1443
Authentication Timeout......................... 300
Supported Captive Portals...................... 10
Configured Captive Portals..................... 1
Active Captive Portals......................... 0
Local Supported Users.......................... 128
Configured Local Users......................... 3
System Supported Users......................... 1024
Authenticated Users............................ 0