Dell N1100-ON

Switch Management Commands 2095
Name Security Views
Model Level Read Write Notify
----------------- ----- ------ -------- -------- ------
user-group V3 Auth-Priv Default "" ""
managers-group V3 NoAuth-priv Default Default ""
managers-group V3 NoAuth-priv Default "" ""
console#show snmp group DefaultWrite
Name Context Security Views
Prefix Model Level Read Write Notify
--------------------- ---------- ----- ------------- -------- -------- -----
---
DefaultWrite "" V1 NoAuth-NoPriv Default Default Default
DefaultWrite "" V2 NoAuth-NoPriv Default Default Default
DefaultWrite "" V3 NoAuth-NoPriv Default Default Default
DefaultWrite "" V3 Auth-NoPriv Default Default Default
DefaultWrite "" V3 Auth-Priv Default Default Default
Command History
The example was updated in release 6.4.
show snmp user
Use the show snmp user command to display the configuration of users.
Syntax
show snmp user [username]
• username — Specifies the name of the user. (Range: 1-30)
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes