Switch Management Commands 1972
Line Commands
This section explains the following commands:
Authentication commands related to line configuration mode are in
DHCP
Client Commands
.
accounting
Use the accounting command in Line Configuration mode to apply an
accounting method to a line config.
Use the no form of the command to return the accounting for the line mode
to the default.
Syntax
accounting {exec|commands} [default|list-name]
no accounting
• exec—Provides accounting for a user Exec terminal session.
• commands—Provides accounting for all user-executed commands.
• default—The default list of methods for accounting services.
• list-name—Character string of not more than 15 characters used to
name the list of accounting methods. The list name can consist of any
printable character other than a question mark. Use quotes around the
list name if embedded blanks are contained in the list name.
accounting line
authorization login authentication
enable authentication login-banner
exec-banner motd-banner
exec-timeout password (Line Configuration)
history show line
history size speed
terminal length
To Next Page
Loading...
