Switch Management Commands 1971
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec, Global Configuration mode and all Configuration submodes
User Guidelines
This command is only available on switches equipped with an out-of-band
interface.
Example
console(config-if)#show ipv6 interface out-of-band
IPv6 Administrative Mode........Enabled
IPv6 Prefix is..................FE80::21E:C9FF:FEAA:AD79/64
::/128
IPv6 Default Router.............FE80::A912:FEC2:A145:FEAD
Configured IPv6 Protocol........None
IPv6 AutoConfiguration mode............Enabled
Burned In MAC Address...........001E.C9AA.AD79
To Next Page
Loading...
