Audio Visual Bridging Commands 1079
IGMP snooping can interfere with MMRP/MVRP. Disable IGMP snooping if
using MMRP/MVRP.
MMRP propagates VLAN registration information to allow switches in the
network to dynamically learn and configure VLANs. Refer to IEEE Std.
802.1Q-2005 and IEEE Std. 802.1Qbe-2010 for further information. In
particular, MMRP must also be enabled on the individual interfaces to
become operational.
MMRP does not support configuration of default group filtering behavior.
MMRP does not support the optional Registrar Administrative Control for
MAC addresses.
Command History
Introduced in version 6.2.0.1 firmware.
Example
This example enables MMRP globally.
console(config)#mmrp global
mmrp periodic state machine
Use this command to globally enable the MMRP periodic state machine. Use
the no form of the command to globally disable the MMRP periodic state
machine.
Syntax
mmrp periodic state machine
no mmrp periodic state machine
Default Configuration
By default, the MMRP periodic state machine is disabled globally.
Command Mode
Global Configuration
To Next Page
Loading...
