Dell N1100-ON

Security Commands 856
Command Mode
Global Configuration mode
User Guidelines
The RADIUS server can place a port in a particular VLAN based on the result
of the authentication. VLAN assignment must be configured on the external
RADIUS server using the RADIUS TUNNEL-TYPE attribute and others. See
RADIUS Commands and Security Commands for further information.
Example
The following example enables RADIUS-assigned VLANs.
console(config)#aaa authorization network default radius
aaa ias-user username
Use the aaa ias-user username command in Global Configuration mode to
configure IAS users and their attributes. Username and password attributes
are supported. The ias-user name is composed of up to 64 alphanumeric
characters. This command also changes the mode to a user Configuration
mode. Use the no form of this command to remove the user from the internal
user database.
Syntax
aaa ias-user username user
no aaa ias-user username user
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration
User Guidelines
This command has no user guidelines.