Security Commands 875
SSH networkList enableNetList
HTTPS :local
HTTP :local
DOT1X :
show authentication statistics
Use this command to display the Authentication Manager statistics on one or
more interfaces.
Syntax
show authentication statistics interface-id
• interface-id—The physical interface.
Default Configuration
There is no default configuration for this command.
Command Modes
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
config# show authentication statistics gi1/0/1
Port........................................... Gi1/0/1
802.1x attempts................................ 1
802.1x failed attempts......................... 0
Mab attempts................................... 0
Mab failed attempts............................ 0
Captive-portal attempts........................ 0
Captive-Portal failed attempts................. 0
To Next Page
Loading...
Need help?
General
