Dell N1100-ON

Layer 3 Routing Commands 1491
• 7 — Sets the network control precedence.
Default Configuration
There is no default configuration for this command.
Command Mode
Route Map mode
User Guidelines
The set ip precedence clause may be combined with set ip next-hop or set ip
default next-hop clause in a route map.
Example
console(config-route-map)#set ip precedence 5
show ip brief
Use the show ip brief command to display all the summary information of
the IP.
Syntax
show ip brief [vrf vrf-name]
• vrf-name—The name of the VRF instance on which the command
operates. If no VRF parameter is given, information for the default
(global) router instance is shown.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The VRF identified in the parameter must have been previously created or an
error is returned.