Dell N1100-ON

Layer 2 Switching Commands 567
Extended POE PD
Required: 0.2 watts
Source: local
Priority: low
show lldp med remote-device
This command displays the current LLDP MED remote data. This command
can display summary information or detail for each interface.
Syntax
show lldp med remote-device {gigabitethernet unit/slot/port |
tengigabitethernet unit/slot/port | all}
show lldp med remote-device detail {gigabitethernet unit/slot/port |
tengigabitethernet unit/slot/port}
• all — Indicates all valid LLDP interfaces.
• detail — Includes a detailed version of remote data for the indicated
interface.
Command Mode
Privileged Exec, Global Configuration mode and all Configuration submodes
Default Value
Not applicable
Example
console#show lldp med remote-device all
LLDP Remote Device Summary
Local
Interface RemoteID Device Class
--------- ---------- --------------------
Gi1/0/13 1 Class I
Gi1/0/16 2 Class II
Gi1/0/23 6 Not Defined
Console#show lldp med remote-device detail Gi1/0/1
LLDP MED Remote Device Detail