Dell N1100-ON

Switch Management Commands 2088
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The following fields are displayed:
Example
console# #show sflow 1 sampling
Sampler Receiver Packet Max Header
Data Source Index Sampling Rate Size
----------- ------- ------------- ----------
Gi1/0/1 1 0 128
show sflow source-interface
Use the show sflow source-interface command to display the assigned sFlow
source interface.
Syntax
show sflow source-interface
Default Configuration
This command has no defaults.
Sampler Data
Source
The sFlowDataSource (unit/slot/port) for this sFlow sampler.
This agent will support Physical ports only.
Receiver Index The sFlowReceiver configured for this sFlow sampler.
Packet Sampling
Rate
The statistical sampling rate for packet sampling from this
source.
Max Header Size The maximum number of bytes that should be copied from a
sampled packet to form a flow sample.