Dell N1100-ON

Security Commands 1004
User Guidelines
There are no user guidelines for this command.
Example
console(config-cp 2)#session-timeout 86400
console(config-cp 2)#no session-timeout
verification
Use the verification command to configure the verification mode for a
captive portal configuration.
Syntax
verification { guest | local | radius }
• guest — Allows access for unauthenticated users (users that do not have
assigned user names and passwords).
• local — Authenticates users against a local user database.
• radius — Authenticates users against a remote RADIUS database.
Default Configuration
The default verification mode is guest.
Command Mode
Captive Portal Instance mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-cp 2)#verification local