Dell N1100-ON

Security Commands 1007
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal configuration client status
CP ID CP Name Client MAC Address Client IP Address Interface
----- --------------- ------------------ ----------------- ---------
1 cp1 0002.BC00.1290 10.254.96.47 Gi1/0/1
0002.BC00.1291 10.254.96.48 Gi1/0/2
2 cp2 0002.BC00.1292 10.254.96.49 Gi1/0/3
3 cp3 0002.BC00.1293 10.254.96.50 Gi1/0/4
console#show captive-portal configuration 1 client status
CP ID..................................... 1
CP Name................................... cp1
Client Client
MAC Address IP Address Interface Interface Description
-------------- --------------- --------- --------------------------------
0002.BC00.1290 10.254.96.47 Gi1/0/1 Unit: 1 Slot: 0 Port: 1 Gigabit
0002.BC00.1291 10.254.96.48 Gi1/0/2 Unit: 1 Slot: 0 Port: 2 Gigabit
show captive-portal interface client status
Use the show captive-portal interface client status command to display
information about clients authenticated on all interfaces or a specific
interface.
Syntax
show captive-portal interface {gigabitethernet unit/slot/port|
tengigabitethernet unit/slot/port | fortygigabitethernet unit/slot/port} client
status
Default Configuration
There is no default configuration for this command.