Dell N1100-ON

Switch Management Commands 1983
Command Mode
User Exec and Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
Example
console(config-telnet)#show line
Console configuration:
Serial Port Login Timeout (mins) (secs)........ 10 minutes 0 seconds
Baud Rate (bps)................................ 9600
Character Size (bits).......................... 8
Flow Control................................... Disable
Stop Bits...................................... 1
Parity......................................... none
History:....................................... 10
Telnet configuration:
Remote Connection Login Timeout(mins)(secs).... 10 minutes 0 seconds
History:....................................... 10
SSH configuration:
Remote Connection Login Timeout(mins)(secs).... 10 minutes 0 seconds
History:....................................... 10
speed
Use the speed command in Line Configuration mode to set the line BAUD
rate. Use the no form of the command to restore the default settings.
Syntax
speed {bps}
no speed
• bps — BAUD rate in bits per second (bps). The options are 2400, 9600,
19200, 38400, 57600, and 115200.