Dell N1100-ON

Switch Management Commands 1936
Syntax
show ipv6 dhcp pool poolname
• poolname — Name of the pool. (Range: 1-32 characters)
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec modes, Global Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the configured DHCP pool.
console#show ipv6 dhcp pool test
DHCPv6 Pool: test
show ipv6 dhcp statistics
Use the show ipv6 dhcp statistics command in User Exec mode to display the
global DHCPv6 server and relay statistics.
Syntax
show ipv6 dhcp statistics
Default Configuration
This command has no default configuration.
Command Mode
User Exec mode, Global Configuration mode and all Configuration
submodes