Security Commands 1005
Captive Portal Client Connection Commands
captive-portal client deauthenticate
Use the captive-portal client deauthenticate command to deauthenticate a
specific captive portal client.
Syntax
captive-portal client deauthenticate macaddr
• macaddr — Client MAC address.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode.
User Guidelines
There are no user guidelines for this command.
Example
console#captive-portal client deauthenticate 0002.BC00.1290
show captive-portal client status
Use the show captive-portal client status command to display client
connection details or a connection summary for connected captive portal
users.
Syntax
show captive-portal client [macaddr] status
• macaddr — Client MAC address.
Default Configuration
There is no default configuration for this command.
To Next Page
Loading...
