Dell N1100-ON

Security Commands 1019
Captive Portal User Group Commands
user group
Use the user group command to create a user group. Use the no form of this
command to delete a user group. The default user group (1) cannot be
deleted.
Syntax
user group group-id
no user group group-id
group-id — Group ID (Range: 1–10).
Default Configuration
User group 1 is created by default and cannot be deleted.
Command Mode
Captive Portal Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-cp)#user group 2
console(config-cp)#no user group 2
user group moveusers
Use the user group moveusers command to move a group's users to a different
group.
Syntax
user group group-id moveusers new-group-id
• group-id — Group ID (Range: 1–10).
• new-group-id — Group ID (Range: 1–10).