Dell N1100-ON

Dell EMC Networking CLI 103
• VC — VLAN Configuration (reached via vlan command)
• VRC—VRF Configuration
• VR—Virtual Router Configuration
• v6ACL — IPv6 Access List Configuration
• v6CMC — IPv6 Class-Map Configuration
• v6DP — IPv6 DHCP Pool Configuration
Layer 2 Commands
ACL
Command Description Mode
a
ip access-list Creates an Access Control List (ACL) that is
identified by the parameter accesslistnumber.
GC
deny | permit (IP ACL) The deny command denies traffic if the
conditions defined in the deny statement are
matched. The permit command allows traffic if
the conditions defined in the permit statement
are matched.
ML
deny | permit (Mac-Access-
List-Configuration)
The deny command denies traffic if the
conditions defined in the deny statement are
matched. The permit command allows traffic if
the conditions defined in the permit statement
are matched.
ML
ip access-group Attaches a specified access-control list to an
interface.
GC or
IC
mac access-group Attaches a specific MAC Access Control List
(ACL) to an interface in the in-bound
direction.
GC or
IC
mac access-list extended Creates the MAC Access Control List (ACL)
identified by the name parameter.
GC
mac access-list extended
rename
Renames the existing MAC Access Control List
(ACL) name.
GC