Dell N1100-ON

Dell EMC Networking CLI 210
System Management
logging traps Sets the lowest severity level at which SNMP
traps are logged.
GC
logging web-session Enables web session logging. GC
port Specifies the port number on which the
SYSLOG server listens for messages.
L
show logging Displays the state of logging and the messages
stored in the internal buffer.
PE
show logging file Displays the state of logging and the messages
stored in the logging file.
PE
show syslog-servers Displays the SYSLOG server settings. PE
terminal monitor Enables the display of logging messages over a
telnet of SSH session.
PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
asset-tag Specifies the switch asset-tag. GC
banner exec Sets the message that is displayed after a
successful login.
GC
banner login Sets the message that is displayed just before
the login prompt.
GC
banner motd Specifies message-of-the-day banner. GC
banner motd
acknowledge
Acknowledges message-of-the-day banner. GC
buffers Configures the rising and falling thresholds for
the issuance of the message buffer SNMP trap
and notification via a SYSLOG message.
GC
clear checkpoint
statistics
Clears the statistics for the checkpointing
process.
GC
clear counters stack-
ports
Clears the statistics for all stack-ports. PE
Command Description Mode
a