Dell N1100-ON

Dell EMC Networking CLI 209
Syslog
support-assist Enables support-assist configuration mode if
the EULA has been accepted.
GC
url Configures the URL to reach on the
SupportAssist remote server.
SAC
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
clear logging Clears messages from the in memory logging
buffer.
PE
clear logging file Clears messages from the logging file. PE
description (Logging) Describes the SYSLOG server. L
level Specifies the level of SYSLOG messages sent to
the server.
L
logging cli-command Enables CLI command logging. GC
logging Configures a SYSLOG server GC
logging audit Enables switch auditing. GC
logging buffered Enables logging to the in-memory log. GC
logging console Enables logging to the console. GC
logging facility Configures the facility to be used in SYSLOG
messages.
GC
logging file Enables logging to the persistent (on flash) log. GC
logging monitor Enables logging messages to telnet and SSH
sessions with the default severity level.
GC
logging on Enables error messages logging. GC
logging protocol Logs messages in RFC5424 of RFC 3164
format.
GC
logging snmp Enables SNMP Set command logging. GC
logging source-interface Selects the interface from which to use the IP
address in the source IP address field of
transmitted SYSLOG packets.
GC
Command Description Mode
a