Security Commands 941
Default Configuration
The default value is 15 seconds.
Command Mode
RADIUS mode
User Guidelines
User must enter the mode corresponding to a specific RADIUS server before
executing this command.
Example
The following example specifies the timeout setting for the designated
RADIUS Server.
console(config)#radius-server host 192.143.120.123
console(config-radius)#timeout 20
usage
Use the usage command in RADIUS mode to specify the usage type of the
server.
Syntax
usage type
• type — Variable can be one of the following values: login, dot1x or all.
Default Configuration
The default variable setting is all.
Command Mode
RADIUS mode
User Guidelines
User must enter the mode corresponding to a specific RADIUS server before
executing this command.
To Next Page
Loading...
