Security Commands 1015
• timeout — Session timeout. 0 indicates use global configuration (Range:
0–86400 seconds).
Default Configuration
The global session timeout is used by default.
Command Mode
Captive Portal Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-cp)#user 1 session-timeout 86400
console(config-cp)#no user 1 session-timeout
Captive Portal Status Commands
show captive-portal configuration
Use the show captive-portal configuration command to display the
operational status of each captive portal configuration.
Syntax
show captive-portal configuration cp-id
• cp-id — Captive Portal ID.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
To Next Page
Loading...
