Security Commands 995
• port-num — The port number on which the HTTPS server listens for
connections (Range: 1025–65535).
Default Configuration
Captive portal listens on port 443 by default.
Command Mode
Captive Portal Configuration mode.
User Guidelines
The port number should not be set to a value that might conflict with other well-
known protocol port numbers used on this switch.
Example
console(config-cp)#https port 1443
console(config-cp)#no https port
show captive-portal
Use the show captive-portal command to display the status of the captive
portal feature.
Syntax
show captive-portal
Default Configuration
There is no default configuration for this command
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
There are no user guidelines for this command.
To Next Page
Loading...
