Dell N1100-ON

Security Commands 887
Example
console(admin-profile)#rule 1 permit command “access-list *”
console(admin-profile)#
show admin-profiles
Use the show admin-profiles command to show the administrative profiles. If
the optional profile name parameter is used, only that profile will be shown.
Syntax
show admin-profiles [name profile-name]
• profile-name —The name of the administrative profile to display.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The following admin profiles are predefined and may not be deleted or
changed by the administrator:
• Profile: network-admin
• Profile: network-security
• Profile: router-admin
• Profile: multicast-admin
• Profile: dhcp-admin
• Profile: CP-admin
• Profile: network-operator.
Example
console#show admin-profiles name qos
Profile: qos