Dell N1100-ON

Layer 2 Switching Commands 561
show lldp
Use the show lldp command to display the current LLDP configuration
summary.
Syntax
show lldp
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the current LLDP configuration summary.
console#show lldp
LLDP Global Configuration
Transmit Interval............................ 30 seconds
Transmit Hold Multiplier..................... 4
Reinit Delay................................. 2 seconds
Notification Interval........................ 5 seconds
Command History
Example updated in the 6.4 release.
show lldp interface
Use the show lldp interface command to display the current LLDP interface
state.