Layer 2 Switching Commands 412
show statistics switchport
Use the show statistics command to display detailed statistics for a specific
port or for the entire switch.
Syntax
show statistics {interface-id |switchport}
• interface-id—The
interface ID. See
Interface Naming Conventions
for
interface representation.
• switchport—Displays statistics for the entire switch.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
It is possible to enter interface configuration mode from global configuration
mode or from interface configuration mode.
RFC Cross Reference
Textual Explanation RFC 2863 MIB Identifier
Total Packets Received (Octets) ifHCInOctets
Unicast Packets Received ifHCInUcastPkts
Multicast Packets Received ifHCInMulticastPkts
Broadcast Packets Received ifHCInBroadcastPkts
Receive Packets Discarded ifInDiscards
Octets Transmitted ifHCOutOctets
Unicast Packets Transmitted ifHCOutUcastPkts
To Next Page
Loading...
