Dell N1100-ON

Layer 2 Switching Commands 631
Default Configuration
The default minimum links is 1.
Command Mode
Interface Configuration (port-channel) mode
User Guidelines
This command has no user guidelines.
Example
console(config)#interface port-channel 1
console(config-if-Po1)#port-channel min-links 3
console(config-if-Po1)#no port-channel min-links
show interfaces port-channel
Use the show interfaces port-channel command to show port-channel
information.
Syntax
show interfaces port-channel [ port-channel-number ]
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec, Global Configuration mode and all Configuration submodes
User Guidelines
The command displays the following information.