Switch Management Commands 1882
Command Mode
Privileged Exec mode
User Guidelines
The description accepts any printable characters except a question mark.
Enclose the string in double quotes to include spaces within the description.
The surrounding quotes are not used as part of the description. The CLI does
not filter illegal combinations of characters on entry and may accept entries
up to the first illegal character or reject the entry entirely.
Command History
Updated in version 6.3.0.1 firmware.
Example
The following example attaches a file description to the active image.
console#filedescr active “backedup on 03-22-05”
rename
Use the rename command to rename a file present in flash.
Syntax
rename
source
dest
• source — Source file name
• dest — Destination file name
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode
User Guidelines
Renaming the image1 or image2 files may cause the switch to not boot.
To Next Page
Loading...
