Dell N1100-ON

Security Commands 1008
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal interface client status
Client Client
Intf Intf Description MAC Address IP Address
------ ----------------------------------- ----------------- ---------------
Gi1/0/1 Unit: 1 Slot: 0 Port: 1 Gigabit 0002.BC00.1290 10.254.96.47
0002.BC00.1291 10.254.96.48
Gi1/0/2 Unit: 1 Slot: 0 Port: 2 Gigabit 0002.BC00.1292 10.254.96.49
Gi1/0/3 Unit: 1 Slot: 0 Port: 3 Gigabit 0002.BC00.1293 10.254.96.50
console#show captive-portal interface gi1/0/1 client status
Interface................................. Gi1/0/1
Interface Description..................... Unit: 1 Slot: 0 Port: 1 Gigabit
Client Client
MAC Address IP Address CP ID CP Name Protocol Verification
----------------- --------------- ----- ----------------- -------- ---------
0002.BC00.1290 10.254.96.47 1 cp1 http local
0002.BC00.1291 10.254.96.48 2 cp2 http local
Captive Portal Interface Commands
show captive-portal interface configuration
status
Use the show captive-portal interface configuration status command to
display the interface to configuration assignments for all captive portal
configurations or for a specific configuration.
Syntax
show captive-portal interface configuration [cp-id] status
• cp-id — Captive Portal ID.