Switch Management Commands 2014
show rmon collection history
Use the show rmon collection history command in User Exec mode to
display the requested group of statistics. Also see the
rmon collection history
command.
Syntax
show rmon collection history [{gigabitethernet unit/slot/port |
port-channel
port-channel-number
| tengigabitethernet unit/slot/port |
fortygigabitethernet unit/slot/port}]
Default Configuration
This command has no default configuration.
Command Mode
User Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The following table describes the significant fields shown in the display:
Example
The following example displays all RMON group statistics.
console> show rmon collection history
Index Interface Interval Requested Granted Owner
Samples Samples
----------------------------------------------------------
Field Description
Index An index that uniquely identifies the entry.
Interface The sampled Ethernet interface.
Interval The interval in seconds between samples.
Requested Samples The requested number of samples to be saved.
Granted Samples The granted number of samples to be saved.
Owner The entity that configured this entry.
To Next Page
Loading...
Need help?
General
